During the installation, connection and commissioning of DC motor governor, it is impossible to install, remove or replace the circuit of the equipment when it is live, which may easily burn out. For how to prevent DC motor governor from burning, Shenzhen longhui motor summarizes the following six measures to prevent burning:

DC motor

1. During the installation, connection and commissioning of the DC motor governor, the professional technicians shall not install, remove or replace the equipment circuit when it is electrified.

2. It is necessary to install necessary protective devices between the power input end of DC motor and the power (battery) to avoid dangerous accidents or fatal injuries; it is necessary to install: overcurrent protector, safety, emergency switch.

3. Do a good job in isolation and insulation protection with the earth and equipment.

4. If it is necessary to conduct live debugging, select a non-metallic special screwdriver or special debugging tool with good insulation.

5. It needs to be installed in a well ventilated environment.

6. It can not be directly used in the abnormal environment with high humidity, dust, corrosive gas and strong vibration.

DC motor governor related:

1. Types, parameters and characteristics of DC motor governor

2. Application of DC motor governor in machine tool

3. Working principle diagram of DC motor governor

4. Four reasons for the blocking operation of DC motor governor

5. Under what circumstances should we choose to use DC motor governor?